2 off 305 x 305 x 915mm ( 3ft ) Acoustic Foam Profiled Fronted Bass Traps (AFBT02)

1ft x 1ft x 3ft (305mm x 305mm x 915mm)

The AFBT02 Bass Trap Features a profiled front face allowing larger surface area for sound absorption

Cleans and tightens bass response

Bass Traps works by trapping the random 'omni-directional' bass energy that tends to cluster in corners and overwhelm the room. They have the positive effect of reducing smear and giving bass more definition and punch allowing you to control low frequency energy. and helping your studio to attain a tighter, more controlled bass .

can be attached to walls with spray adhesive, evo stick contact or evo stick impact adhesives

All foam products supplied upon leaving our factory conform to the requirements of Schedule 1, part 1, of the Furniture and Furnishings (Fire) (Safety) Regulations, S.I. 1324 of 1988 (amended 1989)(Amd 1993), and are also suitable for

applications requiring FMVSS302. The fatigue class is based on BS3379.

Please visit our ebay shop to see more acoustic treatment products available or click on the images to the right for information on a particular product , technical information on the foam used and frequently asked questions are lower down this page.

AFBT01 flat face bass trap
AFBT02 profile face bass trap
AFCF 425 Corner fill for bass traps
AFBTX profile face bass trap
AFBTX 425 x 425mm profiled tile
AFW45 425 x 425 x 45mm wedge tile
AFW75 425 x 425 x 75mm wedge tile
AFW100 425 x 425 x 100mm wedge tile
AFP45 425 x 425 x 45mm pyramid tile
AFP75 425 x 425 x 75mm pyramid tile
AFP100 425 x 425 x 100mm pyramid tile

The acoustic foam grade we use is specifically formulated for acoustic applications by one of the UK's leading specialist foam manufacturers. it has been used for many years as the basic sound absorption foam due to its excellent performance for a wide range of applications. It may be used for acoustic enclosures, studio wall paneling, air handling units (AHU's), air conducting, cab linings and just about any other application where a controlled acoustic sound level is required.

CNC Profile Cut Grey Acoustic Foam, 25kg / m3 Density Foam which has a controlled permeability and open cell structure that gives optimum acoustic performance for a foam of this density.Hardness 125 to 155 Newton's

Below is the Foams Random Incidence Sound Absorption for a flat piece of foam cut at 25mm thick (Typical Results) Frequency (hz) to Relative Absorption Coefficient

125Hz 0.06
250Hz 0.12
500Hz 0.33
1000Hz 0.6
2000Hz 0.72
4000Hz 0.97

Sound dampening for small sized areas like vocal sound booths help prevent echo and improve acoustics and give a more pure sound response. This tile is also ideal for home recording studio applications, home cinemas, server rooms etc.

Tim G from www.timgmusic.co.uk of mtv fame used our Acoustic Foam Products in his new studio bunker7 www.bunker7.co.uk and gave us this feedback : the foams done a really good job at making the room dead. I've found its particularly good for vocals and brass as it seems to soak up loads of mid and high frequencies. and absorbs fairly low frequencies (at a guess i'd say down to about 400hz) overall its ideal for use in a vocal isolation booth / instrumental booth where you want no room reflections. I was amazed at how good a sax sounded when miced from the other side of the room when recorded it really soaked it all up!